Triangulating Multiples, DCF, and Peer Checks
How Canadian DIY investors combine three valuation methods — trailing and forward multiples, a simple DCF, and peer comparisons — into one honest value range, with a hypothetical football-field chart and decision rules. Educational, not advice.
By AndrewPublished Updated

Surveyors don’t fix a position from one sighting. They take angles from several known points and see where the lines cross. Valuation works the same way. Any single method — a P/E, a DCF, a peer table — has blind spots. Use three independent methods and pay attention to where they agree and where they don’t. That gives you a far more honest answer than any one model run to two decimal places.
Educational only — not financial advice. All figures are hypothetical.
Direct answer
Estimate value three ways: (1) the stock’s own history of multiples, (2) a simple DCF with a sensitivity grid, and (3) a peer multiple range. Plot the three ranges side by side (a “football field”). If they overlap, the overlap is your working fair-value zone. If they don’t, the disagreement is the finding — work out which method is wrong for this business before you act.
Why one method isn’t enough
| Method | What it captures | Blind spot |
|---|---|---|
| Own-history multiples | What the market has typically paid for this business | Assumes the business and interest rates haven’t changed |
| Simple DCF | Cash the business can generate, discounted for risk | Very sensitive to discount rate and terminal growth |
| Peer multiples | What the market pays today for similar businesses | The whole group can be mispriced; “peers” may not be comparable |
Each method fails in a different way. Combining them won’t make you right, but it makes you less likely to be confidently wrong. Background on the split between relative and intrinsic methods is in relative vs intrinsic valuation.
The triangulation workflow
Step 1 — Own-history multiple range
Pick the multiple that fits the industry (P/E, P/FCF, EV/EBITDA, P/B for banks, P/AFFO for REITs). Note the low and high of the past 5–10 years, excluding obvious one-off spikes. Apply that range to normalized current earnings or cash flow.
Step 2 — DCF range
Use the five-input DCF. Take the value range from your sensitivity grid (for example, discount rate ±1 point and terminal growth ±1 point), not a single point estimate.
Step 3 — Peer range
Use 3–6 genuinely comparable companies (how to pick and align peers; for US peers see comparing a TSX stock with a US peer). Apply the peer group’s interquartile range of the multiple to your company’s metric.
Step 4 — Overlay
Plot the three ranges on one chart with the current price as a line. Look for the overlap, then explain any method that sits outside it.
Worked example: a hypothetical TSX industrial
Assumptions (all hypothetical): normalized FCF per share $2.40; normalized EPS $3.00; current price $44.
| Method | Inputs | Value range per share |
|---|---|---|
| Own-history P/E | 13×–18× on $3.00 EPS | $39–$54 |
| DCF | 8–10% discount, 1–3% terminal growth | $36–$58 |
| Peer P/FCF | Peer range 15×–20× on $2.40 FCF | $36–$48 |
| Overlap | $39–$48 |
Reading: the price sits in the middle of the overlap. On these assumptions the stock looks roughly fairly valued. A compelling opportunity would usually show the price below the low end of the overlap — with a reason you can name for why the market is too pessimistic.
When the methods disagree
Disagreement is information. Common patterns:
| Pattern | Likely explanation | What to check |
|---|---|---|
| DCF far above history and peers | Growth or terminal assumptions too generous | Re-run DCF with peer-like growth; reverse-engineer implied growth |
| History far above peers | Business has de-rated (slower growth, higher rates, new risk) | What changed? Is the old multiple still justified? |
| Peers far above history and DCF | Sector-wide enthusiasm | Is the whole group expensive? See when P/E misleads |
| All three low vs price | Market expects something your inputs don’t include | Read the latest earnings call and MD&A for the catalyst |
Weighting the methods
Don’t average blindly. Weight by how well each method fits the business:
| Business type | Lean on | Use lightly |
|---|---|---|
| Stable, cash-generative (utilities, pipelines, staples) | DCF, own-history | — |
| Cyclical (energy producers, miners, chemicals) | Mid-cycle peer multiples, NAV | Trailing P/E, own-history at peak |
| Banks and insurers | P/B vs ROE, own-history | DCF on “free cash flow” |
| Fast-changing (early software, turnarounds) | Scenario DCF | Own-history multiples |
Decision rules you can write down
- Buy zone: price below the low end of the overlap and a named reason the market is too pessimistic.
- Hold zone: price inside the overlap; let business results, not price, drive decisions.
- Trim/review zone: price above the high end of every method; re-check your position size.
- No-conclusion zone: methods don’t overlap — do more work or pass.
Write the zones into the valuation block of your stock brief, with the date and inputs, so you can review them after each quarterly report.
Common mistakes
- Running the DCF after seeing the peer table, then tuning it to match.
- Averaging three ranges into one number and forgetting the spread.
- Using peak-cycle earnings in the history method.
- Picking “peers” that are just in the same sector.
Go deeper
A one-page football-field template is planned for the Valuation Without Fake Precision ebook. The free method above is complete.
Media credits
- Hero: “Wild T2 Theodolite, July 1968.jpg” by Queensland State Archives, public domain, via Wikimedia Commons. Cropped and resized to 1280×720. Real photograph, not AI-generated.
By Andrew · stocksummarizer.com
Guides · coming soon
Want the playbook in one place?
We are compiling free literacy hubs into paid ebook playbooks (Research, Valuation without fake precision, Dividend safety). Soft launch only for now — keep using these free guides, and browse ebooks when a guide ships.
Preview ebook shelfRelated reading
- Investing guideHow to Calculate Dividend Yield in CAD from Filings
- Investing guideHow to Calculate Earnings Yield in CAD from Filings
- Investing guideHow to Calculate EV/EBITDA in CAD from Filings
- WCN summaryWaste Connections (WCN) — Q3 beat, outlook raised again and a 10% dividend hike; ~27x forward P/E
- ATD summaryCouche-Tard (ATD) — Irving Oil Québec and Ontario deal as Żabka looms; ~16x trailing P/E
- Sector deep diveCanadian software and tech stocks: the one-month rebound, Celestica’s quarter, valuation and targets
- Investing guideHow to Research a TSX Stock from Scratch (Canadian DIY Framework)
- Investing guideHow to Read Quarterly Earnings for TSX Companies
- Investing guideHow to Compare Two TSX Peers Side by Side
Educational only — not financial advice. Do your own research. See our disclosures.